• Shapton Glass Stone 10000

    129  inc. VAT
    Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The best step up from the 6000 grit for polishing your edge. The Shapton Glass 10000 will provide fast results and will give you a perfect feel of control and feedback of your sharpening. It is a finishing stone if you are looking for a mirror finish on your blade’s edge. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Shapton Glass Stone 120

    44  inc. VAT
    Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The 120 is a fixing / starting stone and required only if you need to fix chips or any other damages on your knives or if you need to re-profile or thinning. If you need just a normal sharpening or retouch, you may need to go to a higher grit avoid removing too much material from your blade. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Shapton Glass Stone 320

    49  inc. VAT
    Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The 320 is a coarse / starting stone grit and required if your knives got really dull and / or if u need to fix chips or any other damages on your knives or if you need to reprofile or thinning. It will remove the scratches from lower grit stones and work as a step to a higher grit stone like 1000. If you need just a normal sharpening or retouch, you may need to go to a higher grit avoid removing too much material from your blade. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The best step up from the 3000 grit for refining and polishing your blade. The Shapton Glass 6000 will provide polished edge results and will give you a perfect feel of control and feedback of your sharpening. In most cases can be used as a finishing stone unless you are looking for a mirror finish on your blade’s edge. It’s the ideal grit for making a great refined edge! This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Shapton Kuromaku 12000

    89  inc. VAT
    Shapton Kuromaku 12000 Dimensions: 210mm x 70mm x 15mm The 12000 is a finishing stone and is required if you need the final polish on your knives. It’s where you should finish your sharpening progress if you need a refined polished edge or if you need to refresh just by a touch or polish your edge. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. You don’t have to buy an extra stone base as its case can be used as base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Sold out!
    The DEBADO LD is a popular series of whetstones for professionals and professional-grade knives. Retains its former superior sharpening quality while incorporating advances in effectiveness and non-absorbance. Made with Suehiro original manufacturing process for producing fired, non-absorbent whetstones, the grinder becomes slick with just a few drops of water. Ideal for achieving a sharp edge, the whetstone is harder than previous models and resistant to wear. While designed for professional-use knives, the series is also recommended for the regular maintenance of household knives. Splash ‘n Go technology. -  Whetstone Size 206×73×29mm -  Appr. 950g -  Includes surface restoration stone
  • Experience the smoothness of superb sharpening. Never deforming or degrading, the “Gokumyo” is the ultimate whetstone. The “Suehiro Gokumyo Series” is made with a combination of ultra-fine abrasives, and binders. The fired ceramic whetstones, while taking full advantage of the properties of ultra-fine abrasives, overcome the drawbacks of conventional natural and resin based whetstones, which could lose their hardness due to temperature changes, or when immersed in water, and which could suffer surface degradation and cracking. The abrasives have been enhanced from #13,000 (1.0 micron) to #20,000 (0.5 micron), resulting in a whetstone giving a smooth, superbly sharp edge, far exceeding the synthetic stones which came before. It is Splash 'n Go Size: 205×73×19~21mm – Weight: 1200gr Instructions for use: This well-made whetstone has a dense concentration of ultra-fine air pockets and can be used immediately by lightly wetting it. Before using the whetstone, either briefly submerge it in water, or wet the surface with your hand, then begin sharpening. Under normal circumstances (summer or winter temperature variations, immersion in water), there is no risk of a loss of quality. It can be used in the same manner as conventional (kiln-fired) whetstones. * To maintain the stone’s ability to sharpen, please clean the whetstone with water and restore the surface with the restoration stone included in the set after each use.
  • Sold out!
    Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) If you’re lookingto cover all your sharpening needs with a complete set from basic 1000 stone up to 3000 that will give you a razor sharp blade and to 8000 grit for a high polishing effect, then the Shapton Glass Set that includes 1000, 3000 & 8000 grits is your way to also save some money! Their  unparalleled even particle distribution, density and ease of use will take your edge to a different level. Shapton Glass Set 100/3000/8000 is considered to be the top option when you want to get the ultimate results at a lower cost than buying the 3 stones separatelly. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Shapton Glass Stone 16000

    129  inc. VAT
    Using 0,92 micron size particles in a perfect particle distribution and density matrix, combined with ease of use and cutting speed, this finishing stone is everything you need if you are a sharpener looking for the ultimate results and top mirror polishing results. Ideal also for straight razor sharpening, will remain flat for longer, will never warp and will last most probably for a life time. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The best step up from the 1000 grit for refining and polishing your blade. The Shapton Glass 3000 will provide such fast results and will give you a perfect feel of control and feedback of your sharpening. In most cases can be used as a finishing stone unless you are looking for a mirror finish on your blade’s edge. It’s the ideal grit for making a great, everyday working edge! This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Sold out!
    Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The 1000 is the most basic stone grit and absolutely required in every sharpening set. It’s where you should start if you observed that your knife lost its initial cutting ability, got dull and honing is not changing the situation. It will give your knife a workable edge. If you need to refresh just by a touch or polish your edge, you may need to go to a higher grit avoid removing too much material from your blade. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
  • Sold out!
    Dimensions: 210mm x 70mm x 15mm The 320 grit is perfect for those blades that are chipped or have broken tips as well as those that need to be thinned or re-profiled! This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. You don’t have to buy an extra stone base as its case can be used as base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.

Title

Go to Top