Hatsu – Kokoro means innocent spirit. A very important wholesaler from Amagasaki city in Hyogo prefecture cooperating with some of the best craftsmen in Japan. The Hatsukokoro brand is their house brand, crafted from undisclosed but some of the most experienced blacksmiths.
The Kumogake line is made of Aogami – 2 (Blue-2) carbon steel with a softer iron clad. Features a beautiful combination of traditional Kurouchi and Damascus pattern and a practical octagonal Wa handle made of Wenge.
A multi-purpose knife and similar to Nakiri with usually a slightly different nose shape and shorter profile. Recommended mainly for push cut, slice and chopping cutting techniques. The Bunka was developed as an evolution to Nakiri with a more pointed nose for more delicate cuts.
P.S. The Kumogake series comes grinded but not fully sharpened to their potential so they need sharpening. Unless you are an experienced sharpener, “Extra Sharpness” service is strongly recommended.
|Brand / Blacksmith:||Hatsukokoro|
|Knife type:||Bunka 180mm|
|Blade Length / Total length (mm):||180 / 320|
|Grind:||50 / 50|
|Finish:||Kurouchi / Damascus|
|Steel type:||Aogami – 2 (Blue-2)|
|Forging method:||San Mai|
|Handle type / Material / Ferrule:||Octagonal / Wenge / Horn|
|Spine Thickness at heel / tip (mm):||3,4 / 0,2|
|Blade height at heel (mm):||45|
Important Note: This is a Carbon Steel knife and not a stainless one. Requires attention and care in its maintenance like quick washing and drying after use, storing in low humidity area and application of mineral oil if not used for some time.
Over time it will form a patina that will protect it from rust. In case rust appears, use baking soda on wet blade, leave it for 10 mins and rub carefully with your finger or a soft sponge. In case rust is not removed, contact us for further instructions.